
KM-N2
Wieloobwodowy miernik poboru mocy do montażu w panelu sterowania
- Odpowiedź na problemy konstrukcyjne, montażowe i eksploatacyjne.
- Możliwość pomiaru aż 4 obwodów przy użyciu jednego miernika poboru mocy.
- Współpraca z uniwersalnymi przekładnikami prądowymi i możliwość wykorzystania w wielu obszarach roboczych.
- Duży, łatwy do odczytu biały wyświetlacz LCD zapewniający lepszą widoczność.
- Pomiary o wysokiej precyzji klasy 0.5S IEC (tylko miernik poboru mocy).
Modele i specyfikacja
Ordering information
Power monitor
Note: To use a commercially available current transformer, use a CT with a secondary current rating of 1 A or 5 A, and a rated load of at least 1.0 VA.
Connectable OMRON split-type Current Transformers (CTs)
Note: The CT cables connected to the CT have the following recommended characteristics:
- cross section 0.75 mm² = AWG18
- 2C (number of internal wires is two)
- 1 m long maximum.
The CT cables are not provided by Omron
Specifications
Ratings (Power monitor)
Single-phase two-wire, single-phase three-wire, three-phase three-wire, and three-phase four-wire |
||
Single-phase two-wire: 4 circuits max., Single-phase three-wire or three-phase three-wire: 2 circuits max., |
||
Single-phase, 2-wire:100 to 277 VAC |
||
General-purpose CT with a rated secondary current of 1 A or 5 A 1 |
||
Overvoltage category II, measurement category II, pollution degree 2 |
||
Industrial electromagnetic environment (EN/IEC 61326-1 Table 2) |
||
Ratings (Connectable OMRON Split-type Current Transformers (CTs))
100 MΩ min. (at 500 VDC) (Between through hole and output lead) |
|||
−20 to 55 °C, 85% max. relative humidity (with no condensation) |
|||
−30 to 90 °C, 85% max. relative humidity (with no condensation) |
Performance (Power monitor)
Total power consumption (active, regenerative, and reactive), power (active and reactive), current, voltage, power factor, and frequency |
||
0.5% (IEC 62053-22 class 0.5S) 2 |
||
2% (IEC 62053-23 class 2) 1 |
||
Single amplitude: 0.1 mm, Acceleration: 15 m/s2, Frequency: 10 to 150 Hz, 10 sweeps for 8 min each along three axes |
||
150 m/s², 3 times each in 6 directions (up/down, left/right, forward/backward) |
||
ON residual voltage: 1.5 V max. (for output current of 50 mA) |
||
If you measure more than one circuit with one Power Monitor, the number of circuits is treated as the number of connected Power Monitors. |
||
Jak możemy Ci pomóc?
W razie pytań lub chęci przesłania prośby o wycenę skontaktuj się z nami lub wyślij zlecenie.
Proszę o kontakt KM-N2

Dziękujemy za wysłanie zapytania. Otrzymasz od nas odpowiedź tak szybko, jak to tylko będzie możliwe.
Problem techniczny. Akcja nie została wykonana. Przepraszamy - spróbuj ponownie.
DownloadOferta dla KM-N2
Poniżej możecie Państwo wysłać zapytanie cenowe dotyczące naszych produktów. Prosimy wypełnić wszystkie pola oznaczone *. Twoje dane osobowe będą oczywiście traktowane jako poufne.

Dziękujemy za zlecenie wyceny. Dostarczymy Ci niezbędnych informacji tak szybko, jak to tylko będzie możliwe.
Problem techniczny. Akcja nie została wykonana. Przepraszamy - spróbuj ponownie.
Download